Z100C DNA Pod Mod Vape Kit | GeekVape

Z100C DNA Pod Mod Kit by GeekVape is made for cloud chasers with its high-wattage vaping and huge, dense vape cloud production! The Geek Vape Z100C Mod has the intelligent, versatile DNA 100C chip set (first DNA pod mod, as at 2022), compatibility with both 18650 and 21700 batteries, 100W and separate select button for easy menu navigation.

The Z100C Mod is accompanied by the 5mL vape juice capacity Z100C Pod, complete with top adjustable airflow, wide 810 drip tip, easy side fill and replaceable GeekVape P Series Coils that gives you vapour flavour for days!

GeekVape Z100C Pod is stairway to vape clouds!

The cake-tier style shape of the Geek Vape Z100C Pod is like a stairway to awesomely-flavoured vape clouds! The ‘steps’ aren’t there purely for decoration since the second tier is actually where your adjustable airflow ring is conveniently located. You can adjust your airflow straight from the Z100C Pod and boy does it give you intense air intake for massive vape clouds! Having top adjustable airflow also gives you the added bonus of it being more leak resistant. More intelligent features of the GeekVape Z100C Pod include its:

• 5mL vape juice capacity which is large enough to support high-wattage vaping that can use up your e-liquid more quickly
• wide 810 removeable drip tip to give you oodles of dense vapour intake, and the ability to remove and clean it when needed
• easy side fill via a rubber-plug-covered fill port that you can access without removing the pod from the Z100C Mod
• super-strong magnetic connection so your pod stays in place securely while vaping or carrying
  
• intense vapour flavour from your long-lasting GeekVape P Series Coils. When we say long-lasting, we mean it! P Series coils will last you well over a week of vaping!
• high-wattage, warm vaping from the 50 to 85W range you have with the included 0.15 and 0.4 ohm P Series Coils
• easy coil change from the bottom of the pod; pull out the old and plug in the new, primed coil.

Direct-lung (DL) madness!

Madness in a good way. The GeekVape Z100C DNA Pod Mod Kit is a DL vaping dream (where you inhale vapour straight to your lungs, like breathing in through your drip tip). The adjustable high-wattage, more-than-ample adjustable airflow, low-resistance, large P Series Coils and wide 810 drip tip are a perfect recipe for spot-on, fair-dinkum DL vaping.

Don’t even try to mouth-to-lung (MTL) vape with this bad boy for life (a restricted vape that’s held in the mouth, then inhaled to the lungs). However, the Z100C Pod Mod Kit comes with a 510 Adapter so you can attach an MTL tank to it and MTL vape your heart out.

Z100C Mod’s ‘hit me baby one more time’ mode

Replay Mode. It’s the most boasted about feature of many other vape kits with DNA 100C Chips because it guarantees that you get your favourite puff, over and over and over again. For real. When you draw on your Geek Vape Z100C Pod Mod and get what you consider a perfect vape hit, hit ‘save’ and your intelligent DNA 100C Chip will adjust the resistance, wattage and power output of your coil to ensure every puff is EXACTLY the same as what you saved. It literally replays your puff.

Spoiler alert: All GeekVape P Series Coils have kanthal cores which don’t work well with Replay Mode. BUT since you can attach your favourite tank to the Z100C Mod using the included 510 Adapter, you can choose a tank with stainless steel core coils and Replay till the cows come home. More features you’re going to love about the GeekVape Z100C DNA Mod include its:

• 510 Adapter that we keep mentioning since it opens up this mod to be more than just a pod mod. You can use it as a regular mod with literally any vape tank!
  
• 100W which accommodates for the majority of replaceable coil wattages on the market
• Boost Mode which ramps up your wattage slightly at the beginning of your puff for a boost in your vape hit
• fast Type C charging, capable of charging in less than an hour when plugged into a USB port that can output 3A. Charges much faster than most mods that usually only allow up to 2A charging
• 21700 or 18650 battery compatibility (batteries not included) so you can switch them up and keep vaping with batteries you may already own
• separate menu select button in the middle of the up/down buttons for easy menu navigation
• comfortable hold. The GeekVape Z100C Mod is not small but feels comfortable, like holding a bike handlebar
• DNA 100C chip which is the star of the show with its:
  • upgradeable firmware with Evolv Escribe Software to take meticulous control of your vaping
  • accurate temperature control modes
  • customisable interface which lets you control what settings your home screen displays, for example.

Like many of the GeekVape Z100C Pod Mod’s DNA Chip brothers, you’re getting an extremely versatile electronic cigarette (e-cigarette) with both simple and advanced settings. We’ve been testing the Z100C Pod Mod Kit for some time and it certainly delivers everything it promises!

Please note:

• Before installing new coils, make sure you prime them first by placing a few drops of e-liquid in the coil to saturate the cotton and avoid dry hits or burning. See our ‘how to prime new coils’ FAQ for more information.
• Battery safety is essential, especially with replaceable battery mods like the Geek Vape Z100C Pod Mod Kit. Check out our battery safety blog post for a gist on looking after you vape.
• We do not recommend the this kit for beginner vapers who like to MTL vape.

Z100C DNA Pod Mod Kit features & specs

• Vapour e-liquid capacity: 5mL
• Material: PCTG plastic (BPA free)
• Coil resistance: P Series 0.15 ohm (70-85W) & P Series 0.4 ohm (50-60W)
• Coil material: Mesh KA1 (kanthal)
• Coil compatibility: GeekVape P Series Coils
• Material: zinc alloy
• Chipset: DNA 100C
• Output power: 1-100W
• Output voltage: up to 9V
• Type-C charging port with up to 3A fast charge
• Battery compatibility: 21700 or 18650 (not included)
• 0.96 inch colour screen

Size

• With pod attached 129.6 x 39.09 x 33.09mm

Weight

• 132 grams without battery

Package content

• GeekVape Z100C DNA Mod
• GeekVape Z100C DNA Pod (5mL)
• 2 x GeekVape P Series Coils:
• 0.15 ohm (pre-Installed) (70-85W)
• 0.4 ohm (50-60W)
• Coil tool
• 510 adapter
• 18650 battery adapter
• Type-C USB charging cable

This product does NOT contain nicotine